For an HVAC service to occur there are three residential services that include; installation, repair and AC maintenance. However in terms of AC maintenance there are various problems that are faced by an air conditioner. In addition to improper operation of the air conditioner there are other problems that relate to the air conditioner which are faulty installation, inadequate maintenance and poor services procedure. A faulty installation causes leaking ducts and low air flow. The other problem is that the refrigerant charge does not always match with the manufacturer’s specification.
When there is improper installation the refrigerant charge might not match with the manufacturer’s specification thus the efficiency and performance of the unit is impaired. An air conditioner contains the following; a compressor, condenser, an evaporator coil, and a fan.
Installation of an air conditioner is important as it sets up new humid air in a room or location. Fixing of problems such as lack of cooling or noisiness are done during repair of an AC. Lack of cooling is resulted from the displaced fan lodge, frozen coils and blocked grills.
In order to avoid various issues from arising in the near future then AC maintenance needs to be scheduled regularly. Aside from avoiding problems in the future the AC could last longer than expected and be more efficient. Preventative maintenance is done to guard against potential warranty issues with an AC system to add on the regular AC maintenance.
So as to provide thermal comfort and an acceptable indoor air quality the HVAC system is used. In most buildings and offices the HVAC workers control the control the temperature and air quality by working on heating, ventilation, cooling and refrigeration systems. Thermostat, ducts, air conditioner and furnaces are the different types of HVAC systems. The most visible feature in a HVAC system is the thermostat which is easily accessible and is placed on the wall. For the purpose of keeping the temperature of the home at the desired rate then the thermostat is set manually or in advance.
A huge amount of space is required by the furnace as it is the largest component of the HVAC system. So that the various rooms in a home are supplied hot air then a furnace is used. The furnace requires a source of heating which is accomplished by using the following that is combustion, solar energy, electric resistance and heat pump.
Central, forced air systems and electric baseboard heating systems are the potential systems used in heating as heating in AC is considered to be more complicated. However the most common heating system used is the electric baseboard as it contains its own unit with a temperature gauge which can be adjusted separately. As for the central heating system it mainly lasts longer and only requires little maintenance.